Scanned image quality is poor
The original is a second-generation photo or picture
Reprinted photographs, such as those in newspapers or magazines, are printed by
using tiny dots of ink that make an interpretation of the original photograph, which
degrades the quality. Often, the ink dots form unwanted patterns that can be detected
when the image is scanned or printed or when the image appears on a screen. If the
following suggestions do not solve the problem, you might need to use a better-quality
version of the original.
◦
To eliminate the patterns, try reducing the size of the image after scanning.
◦
Print the scanned image to see if the quality is better.
◦
Make sure that the resolution and color settings are correct for the type of scan job.
Text or images on the back of a two-sided original appear in the scan
Two-sided originals can "bleed" text or images from the back side to the scan if the
originals are printed on media that is too thin or too transparent.
The scanned image is skewed (crooked)
The original might have been placed incorrectly. Be sure to use the media guides
when you place the original on the scanner glass. For more information, see
Load
originals
.
The image quality is better when printed
The image that appears on the screen is not always an accurate representation of the
quality of the scan.
◦
Try adjusting your computer monitor settings to use more colors (or levels of gray).
On Windows computers, you typically make this adjustment by opening Display
on the Windows control panel.
◦
Try adjusting the resolution and color settings.
Solve scan problems
131
The scanned image shows blots, lines, vertical white stripes, or other defects
◦
If the scanner glass is dirty, the image produced does not have optimum clarity.
See
Clean the device
for cleaning instructions.
◦
The defects might be on the original and not a result of the scanning process.
Graphics look different from the original
The graphics settings might not be suitable for the type of scan job that you are
performing. Try changing the graphics settings.
Take steps to improve the scan quality
◦
Use high-quality originals.
◦
Place the media correctly. If the media is placed incorrectly on the scanner glass, it
might skew, which causes unclear images. For more information, see
Load originals
.
◦
Adjust the software settings according to how you plan to use the scanned page.
◦
Use or make a carrier sheet to protect your originals.
◦
Clean the scanner glass. See
Clean the scanner glass
for more information.