Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by
detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or might even
be reduced, on good phone lines. On poor phone lines, ECM increases sending time
and phone charges, but sends the data much more reliably. The default setting is On.
Send a fax
47
Turn ECM off only if it increases phone charges substantially, and you can accept
poorer quality in exchange for reduced charges.
Before turning the ECM setting off, consider the following. If you turn ECM off
•
The quality and transmission speed of faxes you send and receive are affected.
•
The Fax Speed is automatically set to Medium.
•
You will no longer be able to send or receive faxes in color.
To change the ECM setting from the control panel
1. Press Setup.
2. Press the right arrow until Fax Settings appears, and then press OK.
3. Press the right arrow until Error Correction Mode appears, and then press OK.
4. Press the right arrow to select On or Off, and then press OK.